MatMeas RMS-1000C series conductive material resistivity measurement system is mainly used for the evaluation and testing of conductive materials conductivity, the system uses the four-wire resistance measurement principle for design and development, can measure the conductive material resistance and resistivity in high temperature, vacuum atmosphere conditions, can analyze the measured sample resistance and resistivity curve with temperature, time change. At present, it is mainly used for the test samples such as discs, squares and long strips, and can be widely used for the resistivity measurement of carbon conductive materials, metal conductive materials, metal oxide conductive materials, structural polymer conductive materials, composite conductive materials and other materials.
Диапазон температур: РТ-600°С/1000°С
Температурный режим: 0-10°С/мин (типичный: 3°С/мин)
Точность контроля температуры: ±0,5°С
Диапазон измерения сопротивления: 1nΩ~1GΩ
Measurement range of electropositivity: 0.1nΩ.cm~100MΩ.cm
Среда измерения: воздух, текущая атмосфера, вакуумная атмосфера
Метод измерения: Four-wire resistance method
Тестовый канал: Single channel
Размер образца: 10mmx10mmX20mm
Материал электрода: left and right platinum electrode, middle tungsten carbide probe
Режим контроля температуры: PID точный контроль температуры
Формат хранения данных: текстовый формат ТХТ
Передача данных: USB
Источник питания: 220В±10%, 50Гц
Рабочая Температура: 5C до +40с.
Температура хранения: -40С до +65С
Рабочая влажность: вплоть до 95% Относительная влажность при +40с (без конденсации)
Размер оборудования: 630х640х450мм (ДхВхШ)
Масса: 38кг
Стандартный: ASTM B193-02 and GBT 6146-2010, GBT15662-1995 Warranty: 1 год
