MatMeas RMS-1000C series conductive material resistivity measurement system is mainly used for the evaluation and testing of conductive materials conductivity, the system uses the four-wire resistance measurement principle for design and development, can measure the conductive material resistance and resistivity in high temperature, vacuum atmosphere conditions, can analyze the measured sample resistance and resistivity curve with temperature, time change. At present, it is mainly used for the test samples such as discs, squares and long strips, and can be widely used for the resistivity measurement of carbon conductive materials, metal conductive materials, metal oxide conductive materials, structural polymer conductive materials, composite conductive materials and other materials.
Faixa de temperatura: TA-600°C/1000°C
Rampa de temperatura: 0-10°C/min (típico: 3°C/min)
Precisão do controle de temperatura: ±0,5°C
Faixa de medição de resistência: 1nΩ~1GΩ
Measurement range of electropositivity: 0.1nΩ.cm~100MΩ.cm
Ambiente de medição: ar, atmosfera fluida, atmosfera de vácuo
Método de medição: Four-wire resistance method
Canal de teste: Single channel
Tamanho da amostra: 10mmx10mmX20mm
Material do eletrodo: left and right platinum electrode, middle tungsten carbide probe
Modo de controle de temperatura: Controle preciso de temperatura preciso
Formato de armazenamento de dados: Formato de texto TXT
Transmissão de dados: USB
Fonte de energia: 220V±10%, 50Hz
Temperatura operacional: 5C a +40C.
Temperatura de armazenamento: -40C a +65C
Umidade operacional: até 95% umidade relativa em +40c (sem condensação)
Tamanho do equipamento: 630x640x450mm (CxAxL)
Peso: 38kg
Padrão: ASTM B193-02 and GBT 6146-2010, GBT15662-1995 Warranty: 1 ano
